Digital multimeter Unit UTM 1120C (UT120C)

Digital multimeter unit UTM 1120C (UT120C) for measuring DC, AC voltage and current, resistance, capacitance, frequency, diode and continuity test. Digital multimeter equipped with a Data Hold function, auto power off, relative measurement.

Technical characteristics of the DMM unit UTM 1120C (UT120C):

• DC voltage 400 mV / 4 V / 40 V / 600 V +/- (0.8%+3)
• AC voltage 4 V / 40 V / 400 V / 600 V +/- (1.2%+3)
• DC current 400 µa / 4 mA / 40 mA / 400 mA +/- (1.0%+1)
• Alternating current 400 µa / 4 mA / 40 mA / 400 mA +/- (1.5%+5)
• Resistance 400 Ohm / 4 kOhm / 40 kOhm / 400 kOhm / 4 MOhm / 40 MOhm +/- (1.0%+2)
• Capacity 4 nF / 40 nF / 400 nF / 4 UF / 40 UF / 100 UF +/- (4%+3)
• Frequency 10 Hz 100 kHz +/- (0.5%+3)
• The fill factor of 0.1% to 99.9%
• Input impedance for DC voltage measurement 10 Mω
• Power 3V battery (CR2032)
• Display LCD, 43 x 22 mm
• Size 109 x 57.9 x 13 mm
• Weight 75,26 g

The functionality of a digital multimeter unit UTM 1120C (UT120C):

• Miniature and lightweight handheld device.
• The auto off function (after 30 min).
• Data hold function.
• Automatic range selection.
• Relative measurement (REL).
• Various measurements and tests:
• DC.
• AC voltage.
• DC.
• AC.
• Resistance.
• Capacity.
• Frequency.
• Testing diodes.
• Continuity test.
• Powered by batteries 3 V (included).
• Low battery indicator battery (<=2.4 V).

Equipment digital multimeter unit UTM 1120C (UT120C):

• Digital multimeter unit 1120C UTM — 1 PC.
• Plastic protective case — 1 PC.
• User's manual — 1 PC.