Digital multimeter Unit UTM160C (UT60C)

Digital multimeter unit UTM160C (UT60C) measures AC and DC voltage and current, resistance, capacitance, frequency and duty cycle temperature, diode conducts tests, file transfer electric circuits. The multimeter has features like mode, relative measurements and data hold function. The usability in low light conditions are ensured thanks to the illuminated display.

Technical characteristics of the DMM unit UTM160C (UT60C):

• Screen 3999-bit LCD, 63 x 31 mm
• Powered by a 9V battery (6F22)
• Dimensions 177 x 85 x 40 mm
• Weight 340 g
• Constant voltage (DC) 400 mV / 4 V / 40 V / 400 V / 1000 V; ±(0,8%+1)
• An alternating voltage (AC) 4 V / 40 V / 400 V / 750 V; ±(1%+5)
• Direct current (DC) 400 µa / 4000 µa / 40mA /400mA / 4A / 10A; ±(1%+2)
• Alternating current (AC) 400 µa / 4000 µa / 40mA /400mA / 4A / 10A; ±(1,5%+5)
• Resistance 400 Ohm / 4 kOhm / 40 kOhm / 400 kOhm / 4 MOhm / 40 MOhm; ±(1%+2)
• Frequency 10 Hz to 10 MHz; ±(0,1%+3)
• The capacity is 40 nF / 400 nF / 4мкФ / 40µf / 100 UF; ±(3%+5)
• Temperature -40?C1000?C; ±(1%+3)
• Relative duty cycle 0.1% 99.9%
• Range selection Automatic
• Continuity test (with buzzer) +
• Diode test +
• Data hold function +
• Indication low battery +
• Auto power off (sleep mode) +
• Backlight display +
• A function of relative measurements +
• Fullscreen mode +
• Fuse 10A +

The functionality of a digital multimeter unit UTM160C (UT60C):

• Constant voltage
• Variable voltage
• DC
• AC
• Resistance
• Capacity
• Frequency
• Temperature
• The fill factor
• Diode test
• Continuity test (with buzzer)
• Overload protection up to 10A
• Automatic range selection
• Relative measurements
• The function "Data Hold" (hold data)
• The display backlight
• The value output on the entire screen
• Sleep
• Indicator low battery

Equipment digital multimeter unit UTM160C (UT60C):

• Digital multimeter unit UTM160C (UT60C)
• Probes
• Battery
• Thermocouple
• Measuring clamp
• User manual