Digital multimeter Digital Tech M890C+ is designed to measure DC and AC voltage, DC and AC current, resistance, capacitance, diode, transistor, audible continuity test. This model allows to measure the temperature. Has full overload protection.
Specifications DMM M890C+:
- DC voltage: 200mV-2-20-200-1000V
- AC voltage: 2-20-200-750V
- DC current: 2mA-20mA-200mA-20A
- AC current: 200mA-20A
- Resistance: 200-2K-20K-200кОм-2mω-20mω-200mom
- Capacity: 2000пФ-20нФ-200нФ-2мкФ-20uf
- Temperature: -40°C To+1000°C
- Diode check: 3.2 V / 0.8 mA
- The gain of the transistor hFE: VCE-3V, IB-10uA
The functionality of a digital multimeter M890C+:
- 30 position switch work modes and limits.
- High sensitivity - 100 mV.
- Automatic overload indication is "1".
- Automatic polarity constant current or voltage.
- All limits are protected from overload.
- Resistance measurement from 0.1 Ohm to 200 MOhm.
- Capacitance measurement from 1 pF to 20 µf.
- Diode test direct stable current of 1 mA.
- Measurement of the gain of the transistors.
Included in unit DMM M890C+:
- Multimeter M890C+
- Probes
- User manual
| Measurements | |
| Емкость | 2000пФ-20нФ-200нФ-2мкФ-20мкФ |
| Переменное напряжение (AC) | 2-20-200-750В |
| Переменный ток (AC) | 200мA-20A |
| Постоянное напряжение (DC) | 200мВ-2-20-200-1000В |
| Постоянный ток (DC) | 2мA-20мA-200мA-20A |
| Сопротивление | 200-2кОм-20кОм-200кОм-2МОм-20МОм-200МОм |
| Температура | -40°С~+1000°С |
| Special functions | |
| Выбор диапазона | Ручной |
| Прозвонка цепи (со звуковым сигналом) | + |
| Тестирование батарей | + |
| Тестирование диодов | + |
| Тестирование транзисторов | + |
| General characteristics | |
| Назначение | Измерение напряжения |
| Тип | Мультиметры |