Digital multimeter Digital Tech M890F used for measuring DC, AC voltage, DC, AC current, resistance, capacitance, diode, transistor, audible continuity test. this device allows to measure frequency. Method of measurement - ADC double integration with automatic zero point correction automatic polarity and overload indication. Full overload protection.
Specifications DMM M890F:
- DC voltage: 200mV-2-20-200-1000V
- AC voltage: 2-20-200-750V
- DC current: 2mA-20mA-200mA-20A
- AC current: 200mA-20A
- Resistance: 200-2K-20K-200кОм-2mω-20mω-200mom
- Capacity: 2000пФ-20нФ-200нФ-2мкФ-20uf
- Frequency: 20 kHz
- Diode check: 3.2 V / 0.8 mA
- The gain of the transistor hFE: VCE-3V, IB-10uA
The functionality of a digital multimeter M890F:
- 30 position switch work modes and limits
- High sensitivity - 100 mV
- Automatic overload indication is "1"
- Automatic polarity constant current or voltage
- All limits are protected from overload
- Resistance measurement from 0.1 Ohm to 200 MOhm
- Capacitance measurement from 1 pF to 20 µf
- Diode test direct stable current of 1 mA
- Measurement of the gain of the transistors
Equipment digital multimeter M890F:
- Multimeter M890F
- Probes
- User manual
| Measurements | |
| Емкость | 2000пФ-20нФ-200нФ-2мкФ-20мкФ |
| Переменное напряжение (AC) | 2-20-200-750В |
| Переменный ток (AC) | 200мA-20A |
| Постоянное напряжение (DC) | 200мВ-2-20-200-1000В |
| Постоянный ток (DC) | 2мA-20мA-200мA-20A |
| Сопротивление | 200-2кОм-20кОм-200кОм-2МОм-20МОм-200МОм |
| Частота | 20 кГц |
| Special functions | |
| Выбор диапазона | Ручной |
| Прозвонка цепи (со звуковым сигналом) | + |
| Тестирование батарей | + |
| Тестирование диодов | + |
| Тестирование транзисторов | + |
| General characteristics | |
| Назначение | Измерение напряжения |
| Тип | Мультиметры |