Laboratory multimeter Mastech MS8040

Brand: Mastech
Product Code: MM-263
5,198 ₴

  • Availability: In Stock

Laboratory multimeter Mastech MS8040 Stationary measuring device with a power supply and backlight display. Using MS8040 can measure current, voltage, resistance, capacitance, frequency, temperature, to check continuity, test diodes and transistors. Has manual ranging, a function of relative measurements and the maximum and minimum values. This multimeter can be used with the prefix "Module for measuring AC current MS3302".

The functionality of the multimeter MS8040:

  • Measurement functions:
    • AC and DC current
    • AC / DC voltage
    • resistance
    • capacity
    • frequency
    • temperature
    • continuity test (with buzzer)
    • diode test
  • Manual range
  • A function of relative measurements
  • Data hold function
  • Auto power off (sleep mode)
  • Indication of low battery
  • Mode of measurement the minimum and maximum values
  • The display backlight

Technical characteristics of the multimeter MS8040

General characteristics
ScreenLCD display with backlight
Food6 batteries 1.5 V type AA / 1 battery 9 V 6F22
Dimensions238 x 230 x 83mm
Weight1500 g
Measurement
Constant voltage (DC)200 mV / 2 V / 20 V / 200 V / 1000 V; ±(0,05%+6)
An alternating voltage (AC)200 mV / 2 V / 20 V / 200 V / 750 V; ±(0,5%+30)
Direct current (DC)200 µa / 2 mA / 20 mA / 200 mA / 10 A; ±(0,15%+15)
Alternating current (AC)200 µa / 2 mA / 20 mA / 200 mA / 10 A; ±(0,8%+30)
Resistance200 Ohm / 2 kOhm / 20 kOhm / 200 kOhm / 2 MOhm / 20 MOhm / 200 MOhm; ±(0,1%+10)
Frequency20 Hz / 220 MHz; ±(0,06%+10)
Capacity20 nF / 200 nF / 2 UF / 20 UF; ±(1,2%+30) / 200 µf / 2000 µf / 20 MF; ±(2,2%+30) / 200 MF - not regulated
Temperature-30?C1300?C; ±(1,0%+2)
Special functions
RangeManual/Automatic
Continuity test (with buzzer)+
Diode test+
Data hold function+
Indication of low battery+
Auto power off (sleep mode)+
The display backlight+
The maximum/minimum values+
The function of True RMS (true RMS value)+

Supplied with the multimeter MS8040:

  • Multimeter MS8040
  • Test leads – 1 pair
  • RS232C cable
  • Thermocouple – 1 pair
  • Multi-function block – 1 EA.
  • Power cable – 1 PC.
  • Instruction manual - 1 PC.

Write a review

Note: HTML is not translated!
    Bad           Good