Multimeter Mastech MS8212ACE10 (tester pen) - the device that is a portable professional measuring instrument with a convenient LCD display. The device allows you to work with him with one hand, is protected against overload, low battery indication and is suitable for use in the workplace, in schools and at home. Automatic and manual range selection measurement. The multimeter has the function of fixing the current indications and fixing the maximum measured values on the display. Automatic shutdown of the device after a temporary downtime, ensures longer service of battery. The meter power is supplied from two batteries 1.5 V type AA. The device conforms to international safety standard IEC1010-1 standard CAT II 600V.
The functionality of the multimeter Mastech MS8212ACE10:
- Measurement functions:
- Constant voltage
- Variable voltage
- DC
- AC
- Resistance
- Diode test
- Continuity test
- Checking logical signal
- Data hold function
- Sleep
- Indication of low battery
- Overload indication (light/sound)
Technical characteristics of the multimeter Mastech MS8212ACE10:
| General characteristics | |
| Screen | 1999 digits LCD display |
| Food | 2 x 1.5 V AA battery |
| Dimensions | 208 x 38 x 29 mm |
| Weight | 110 g |
| Measurement | |
| Constant voltage (DC) | 200mV / 2V / 20V / 200V / 600V ±(0,7%+2) |
| An alternating voltage (AC) | 200mV / 2V / 20V / 200V ±(0,8%+3); 600V ±(1,0%+3) |
| Direct current (DC) | 20mA / 200mA ±(1,5%+3) |
| Alternating current (AC) | 20mA / 200mA ±(2,0%+3) |
| Resistance | 200 Ω ±(1,0%+3); 2 kOhm / 20 kOhm / 200 kOhm / 2 MOhm ±(1,0%+1); 20mω ±(1,0%+5) |
| Special functions | |
| Range | Automatic / Manual |
| Continuity test (with buzzer) | + |
| Diode test | + |
| Logic test TTL-levels | + |
| Light alarm | + |
| Data hold function | + |
| Indication of low battery | + |
Supplied with the Multimeter Mastech MS8212ACE10
- Multimeter Mastech MS8212ACE10 - 1 PC.
- Measuring wire: 600 V, 10 A (T3060A) -1 PC.
- Measuring clip: 600 V, 10 A, 1 PC.
- Battery 1.5 V AAA - 2 PCs.
- Instruction manual - 1 PC.
| Measurements | |
| Переменное напряжение (AC) | 200мВ / 2В / 20В / 200В ±(0,8%+3); 600В ±(1,0%+3) |
| Переменный ток (AC) | 20мА / 200мА ±(2,0%+3) |
| Постоянное напряжение (DC) | 200мВ / 2В / 20В / 200В / 600В ±(0,7%+2) |
| Постоянный ток (DC) | 20мА / 200мА ±(1,5%+3) |
| Сопротивление | 200 Ом ±(1,0%+3); 2 кОм / 20 кОм / 200 кОм / 2 МОм ±(1,0%+1); 20 МОм ±(1,0%+5) |
| Special functions | |
| Выбор диапазона | Автоматический / Ручной |
| Индикация низкого заряда батареи | + |
| Логическое тестирование ТТЛ-уровней | + |
| Прозвонка цепи (со звуковым сигналом) | + |
| Световая сигнализация | + |
| Тестирование диодов | + |
| Функция удержания данных | + |
| General characteristics | |
| Вес | +/110 г/1999-разрядный ЖК дисплей/2 МОм ±(1,0%+1); 20 МОм ±(1,0%+5)/20 кОм /200 Ом ±(1,0%+3); 2 кОм /200 кОм /200В /200В ±(0,8%+3); 600В ±(1,0%+3)/200мА ±(1,5%+3)/200мА ±(2,0%+3)/200мВ /208 x 38 x 29 мм/20В /20мА/20мА /2В /600В ±(0,7%+2)/Автоматический/Ручной |
| Гарантия | 12 месяцев |
| Назначение | Измерение напряжения |
| Питание | 2 х 1,5 В батарея типа АА |
| Тип | Мультиметры |