SNAKOL SK213 Current Clamps — a universal measuring device for working with electricity, which combines the capabilities of a multimeter and current clamps. Using one device, you can check current, voltage, resistance, capacitor capacity, signal frequency and temperature.
The main advantage of current clamps is that to measure current, you do not need to break the circuit or turn off the equipment. It is enough to cover one wire with the clamps, and the value will immediately appear on the display. This significantly saves time when diagnosing electrical panels, generators, inverters, solar stations or automotive electrical systems.
The SK213 model supports measurement of both alternating and direct current up to 600 A. This allows the device to be used not only for household networks, but also for working with battery systems, backup power supplies and direct current equipment.
The TrueRMS function deserves special attention. In practice, this means that the readings will be correct even when measuring loads with switching power supplies, frequency converters or other modern electronics, where conventional multimeters often show inaccurate values.
What can SNAKOL SK213 do?
- ⚡ Measurement of alternating and direct current up to 600 A
- 🔌 Measurement of AC/DC voltage up to 600 V
- 📏 Measurement of resistance up to 60 MΩ
- 🔋 Checking the capacitance of capacitors up to 60 mF
- 📡 Measurement of frequency up to 20 kHz
- 🌡 Temperature control up to 1000°C
- 🔔 Continuity test with sound indication
- 💎 Diode test
- 🔍 Non-contact voltage detection NCV
Convenient functions for daily work
If you have to work in a panel or technical room with poor lighting, the display backlight will come in handy. The indicators are easy to read even in twilight or in places where there is no normal lighting.
The NCV function allows you to quickly determine the presence of voltage without connecting the probes. For example, you can find a phase wire or check a cable before starting work.
The HOLD, REL and ZERO functions are also provided, which help to fix the results, perform relative measurements and compensate for the initial values when working with small currents.
Technical characteristics:
| Model | SNAKOL SK213 |
| Current | AC/DC up to 600 A |
| Voltage | AC/DC up to 600 V |
| Resistance | Up to 60 MΩ |
| Capacitance | Up to 60 mF |
| Frequency | Up to 20 kHz |
| Temperature | Up to 1000 °C |
| Resolution | 0.01 mA |
| TrueRMS | YES |
| NCV | YES |
| Backlight display | Yes |
| Auto power off | After 15 minutes of inactivity |
| Power | 2 × AAA (1.5 V) |
Where will it come in handy?
- 🔧 Repair and maintenance of electrical networks
- ☀ Solar power plants and inverters
- 🔋 Battery systems and UPS
- 🚗 Automotive electricity
- 🏠 Home workshop
- 🏭 Industrial equipment and electrical panels
If you need a device that will allow you to quickly check most electrical parameters without having to carry several different testers with you, SNAKOL SK213 will be a practical solution for both professional use and home workshop.
In the WST store you can buy SNAKOL SK213 with fast shipping across Ukraine and advice on choosing measuring equipment.
