16mm anti-vandal button , non-latching, 220V, solder pin

Anti-vandal button 16 mm — compact metal switch without locking the position, designed to control electrical circuits by short-term pressing. The button has 2 contacts, a switching scheme OFF-(ON) and terminals for direct connection of wires by soldering.

The metal construction of the button is suitable for installation in various equipment cases, control panels, power supplies, electronic devices and other structures where a compact push-button switch is required.

🔘 Main features

• Without locking — the button works only when pressed and returns to its original position after being released.
• OFF-(ON) scheme — normally open contact with a short-term closing when pressed.
• 2 contacts — easy connection to the electrical circuit.
• Metal housing and button — suitable for use in a variety of equipment.
• Soldering terminals — wires are connected directly to the button contacts.
• Without light indicator — the button does not have a built-in backlight.
• Lifetime up to 50,000 cycles — designed for multiple presses.

⚙️ Non-latching OFF-(ON) button

Unlike latching buttons, this model does not remain in the pressed position. When pressed, the contact closes, and after releasing the button returns to its original state. This operating principle is convenient for starting, switching or supplying a short control signal.

🔧 Installation and connection

To install the button, a hole with a diameter of 19 mm is required. After installation, the button is fixed in the panel, and the electrical connection is made by soldering to two contact terminals.

The button can be used for modernization or manufacturing of control panels, electronic devices, homemade equipment and various electrical structures.

🛠️ Where used

• equipment control panels;
• electronic and electrical devices;
• power supplies;
• homemade devices and projects;
• automation and control systems;
• modernization of housings and panels;
• other equipment where a non-fixed button is required.

📋 Technical specifications

⚠️ Important when connecting

Before installation, you must make sure that the parameters of the electrical circuit correspond to the characteristics of the button. Connection to the 220 V network should be carried out in compliance with electrical safety rules. During soldering and installation, the equipment must be completely de-energized.

Please note: the output characteristics simultaneously indicate «220 V» and «max 18 V». These values ​​contradict each other, therefore, for a responsible connection to the 220 V network, it is recommended to additionally check the marking of this particular button modification.

🛒 Buy a 16 mm anti-vandal button in the WST store

Anti-vandal button 16 mm without fixation — a compact switch with a metal structure, two contacts and terminals for soldering. The model is suitable for installation in panels and housings of electronic equipment, where short-term contact closure is required when pressed.

You can order anti-vandal button 16 mm, OFF-(ON), non-latching in the WST online store. The current price and order conditions are indicated on the product page.

Please note! The product photo may differ slightly in terms of text and color shades from the actual product. This does not affect the technical specifications and functionality of the product.