T2 Electro Tec amplifier is a compact and efficient amplifier for improving decimeter and digital DVB-T2 signal reception in areas with poor coverage, high interference levels or at a considerable distance from the TV tower. It is also ideal for compensating for signal losses with long coaxial cables or connecting multiple receivers.
Unlike classic amplifiers in the form of open boards, T2 Electro Tec is made in a sealed case, resistant to moisture and weather conditions, and is installed directly in the gap of the coaxial cable next to the antenna.
A big advantage of the model is no need for a separate power supply. The amplifier is powered by the tuner via a coaxial cable (5 V), which simplifies installation and increases system reliability.
Operating principle
The T2 Electro Tec amplifier is installed between the antenna and the television receiver and works on the principle of pre-amplification of a weak signal before it is lost in the cable. After activating the 5 V power supply in the DVB-T2 tuner settings, the device automatically starts working.
The input signal from the antenna is amplified to 20 dB with a minimum level of its own noise (≤ 4 dB), which allows you to stabilize the image, reduce "squares", freezes and channel loss.
Advantages:
- 📡 Improved DVB-T2 reception in difficult conditions
- ⚡ 5 V power supply from the tuner — without an external power supply
- 🔒 Sealed housing — protection against moisture and dust
- 🛠 Easy installation — via F-plugs
- 📉 Low noise — cleaner signal
- 💸 Affordable and effective solution
Installation and connection
- 🔩 F-plug "dad" — connection to the antenna
- 🔌 F-plug "mother" — connection to the receiver
- ⚙ Turn on the power 5 V in the DVB-T2 tuner menu
Technical specifications
| Operating frequency range | 470 – 862 MHz |
| Gain ratio | 20 dB |
| Noise ratio | ≤ 4 dB |
| Supply voltage | 5 V (from tuner) |
| Power supply pass-through | No |
| Input impedance | 300 Ohm |
| Output impedance | 75 Ohm |
🔥 When to use?
- 📺 Weak or unstable DVB-T2 signal
- 📡 Long distance to the TV tower
- 📏 Long coaxial cable
- 🔀 Connecting multiple TVs
The T2 Electro Tec amplifier is a simple, reliable and inexpensive solution for stable digital television without interference.
WST is a store where the signal becomes stable. Order T2 Electro Tec right now and watch T2 without "squares" 📶