Tool (HSC8.6-4) for crimping of tubular lugs of 0.08-6mm

CLAMP FOR CABLE ENDS 0.25-10 mm² square

Tool HSC8 6-4 is needed for crimping terminals with single and double insulated and non-insulated terminals.

Using kvapdratnogo clamping jaws and self-regulating system has allowed accurate clamp ferrule or ferrules, thus eliminating any possible crimping errors due to improper selection matrix.

The working range of the tool for single terminals is 0.25-10 mm² and for double terminals 2 x 0.5-4 mm².

Thanks to the use of a special locking system, we get a guarantee of a good clamping, because the pliers only open after crimping the tip.

The price of the tool for crimping tubular lugs HSC8 6-4 is justified and they will pay off in the shortest possible time, not to mention the reliability of fastening the cable in sockets and junction boxes, and thetool is HSC8 6-4 worth buying if you value your reputation and you need reliable contact with a quality guarantee. They can also be called ProFix HT-864 pliers for crimping tubular tips 0.25-6mm (square)

Features crimping tool:

Model: HSC8 6-4

Type: square

Working range:

• Single tips:0.25-10 mm2

• Double terminals:0,5-4 mm2

clamping force adjustment: Yes

Hardened head

mounting system with ratchet action for crimping

Specifications crimping pliers HSC8 6-4

• Length: 170 mm

• Clamp: hexagon

• Non-slip grips

• Self-system

• adjusting jawSingle sleeves: 0.25-10 mm²

• Double sleeves: 2x 0.5-4 mm²