Mini Soldering Iron ZD-715E is a compact device for quickly heating and melting solder during PCB repair, electronic component maintenance, and various soldering tasks. With a power of 100 W, the device is suitable for work where it is necessary to melt solder in a small bath, and its compact size allows it to be conveniently placed on a workbench.
The ZD715E soldering iron has a working bath made of pure copper, which is characterized by high thermal conductivity and contributes to the efficient transfer of heat to the solder. This device is also called a solder crucible, mini-solder bath or solder melting bath.
🔧 Features of the ZD-715E mini-solder bath
- Power 100 W — provides heating of the working bath for melting solder.
- Copper working part — made of pure copper with good thermal conductivity.
- Compact dimensions — convenient to use in the workplace for small repair and installation tasks.
- Heat-resistant plastic handle — allows you to hold the device during operation, observing safety rules.
- Power switch — allows you to turn the heating on and off without disconnecting the cable from electrical network.
- Stand - helps to place the bath on the work surface.
🔩 Dimensions of the working bath
The miniature ZD-715E soldering iron is designed to work with a small amount of molten solder. Before using, consider the dimensions of the working part to make sure that they meet your tasks.
- Diameter of the bath: 16.8 mm.
- Height of the bath: 21.3 mm.
🛠️ Where to use the ZD 715E soldering iron
The soldering iron is suitable for workshops, service centers, radio amateurs and electronics repair specialists. It can be used for the following tasks:
- melting solder before performing soldering operations;
- tinning stripped ends of wires and contacts;
- preparing metal terminals of electronic components for soldering;
- performing auxiliary work during the repair of printed circuit boards and electronic devices.
📋 Technical specifications
| Model | ZD-715E / ZD715E / ZD 715E |
| Device type | Mini-solder bath, soldering crucible, crucible for solder |
| Power | 100 W |
| Working pot material | Pure copper |
| Pot diameter | 16.8 mm |
| Pot height | 21.3 mm |
| Handle material | Heat-resistant plastic |
| Switch power | Yes |
| Stand | Yes |
| Purpose | Heating and melting solder, auxiliary soldering work |
⚠️ Recommendations for use
- Install the solder bath on a stable, heat-resistant surface.
- Do not touch the copper bath during operation and immediately after switching off - it may remain hot.
- Use the device in a well-ventilated area.
- Do not leave the crucible unattended and switch it off after finishing work.
- Before connecting check the compliance of the supply voltage with the parameters of a particular device.
You can buy a mini soldering iron ZD-715E with a power of 100 W in the WST store. The compact soldering iron will be a useful tool for a workshop where soldering and repairing electronic components are regularly performed.
Please note! The product photo may differ slightly in inscriptions and shades of color from the actual appearance. This does not affect the technical characteristics and functionality of the product.
