Zhongdi ZD-8910 preheating station — a powerful device for evenly heating printed circuit boards and electronic components before soldering. The model is equipped with a heating platform measuring 140 × 140 mm, which combines infrared radiation and a ceramic heating element.
The power of 400 W provides effective heating, and the operating range of 200-420°C allows you to select the appropriate temperature depending on the type of board and the work being performed. The station is suitable for repairing phones, LED devices and electronics based on 3C boards.
🔥 Main advantages of ZD8910
- Power of 400 W — provides effective heating of the working surface.
- Temperature range 200-420°C — allows you to use the station for various soldering tasks.
- Heating platform 140 × 140 mm — suitable for working with printed circuit boards of the appropriate size.
- Infrared radiation + ceramics — the design of the heating element ensures heat transfer to the board.
- Aluminum alloy — used for the working heating surface.
- Uniform heating — thermal energy is distributed over the working area without pronounced local overheating zones.
- Quick access to operating temperature — heating time depending on conditions is approximately 10-30 minutes.
- Long service life — the design is designed for regular use.
🌡️ Preheating of printed circuit boards
The ZD-8910 station is designed to preheat the boards before soldering or dismantling components. Preheating allows you to warm up the board before the main soldering operation and makes it easier to work with large or multi-layer areas.
🔧 Heating platform 140 × 140 mm
The working surface measuring 140 × 140 mm is made of aluminum alloy. The platform design is designed to evenly distribute heat across the work area, which is especially important when working with printed circuit boards.
💡 Infrared and ceramic heating
The ZD-8910 uses a combination of infrared radiation and a ceramic heating element. This design is designed to effectively transfer heat to the board and ensure stable heating of the work surface.
📱 For repairing phones and 3C electronics
ZD-8910 can be used for repairing and servicing a variety of electronics, including phones, LED devices, and 3C printed circuit boards. The station will be useful for workshops, service centers and amateur radio work.
🛠️ Applications
- preheating printed circuit boards;
- repair and maintenance of mobile phones;
- working with LED devices;
- repair of 3C electronics;
- preparing boards for soldering and dismantling components;
- service maintenance of electronic equipment.
📋 Technical specifications
| Model | ZD-8910 |
| Type | Preheating station |
| Power | 400 W |
| Temperature range | 200–420°C |
| Heating platform size | 140 × 140 mm |
| Heating element | Infrared radiation + ceramics |
| Working surface material | Aluminum alloy |
| Heating time | Approximately 10-30 min |
| Purpose | Preheating of printed circuit boards and electronic components |
⚠️ Safety recommendations
- Do not touch the heating surface during operation and immediately after switching off station.
- Install the station on a stable heat-resistant surface.
- Do not leave the device turned on unattended.
- Ensure sufficient ventilation of the room during operation.
- After finishing work, wait for the heating platform to cool down.
Zhongdi ZD-8910 — practical preheating station with a power of 400 W with a working platform
🛒 Buy the ZD-8910 preheating station in the WST store
with a size of 140 × 140 mm and a temperature range of 200-420°C. It is designed for preheating boards during the repair of phones, LED equipment and other electronics.You can order the ZD-8910 preheating station in the WST online store. The current price and order conditions are indicated on the product page.
Please note! The product photo may differ slightly in terms of inscriptions and shades of color from the actual appearance. This does not affect the technical characteristics and functionality of the product.
