Desktop fume extractor ZD602 with LED display
ZD-602 — compact desktop fume extractor with adjustable suction power, multi-layer filtration system and LED illumination of the work area. The device is designed for local air purification directly near the workplace and is particularly well suited for soldering, electronics repair and maintenance.
During soldering, flux and solder can produce smoke, fumes and a characteristic odor. ZD602 removes contaminated air from the work area, passes it through a multi-layer filtration system and helps maintain more comfortable air directly near the workplace.
Advantages of the ZD 602 fume extractor
- Compact desktop design — does not require complex installation and is conveniently placed on the desktop.
- Adjustable suction power — you can choose the intensity of work according to the specific task.
- Multi-layer filtration — the system is designed to purify the air from smoke, dust, PM2.5 particles, odors and other contaminants that arise during work.
- LED backlight — illuminates the work area and improves the visibility of small components and the soldering point.
- Digital LED display — located on the front panel and displays operating information.
- Convenient placement with a soldering station — the device is designed to be installed on the same desktop with soldering stations from different manufacturers.
- Low power consumption — the device power is 25 W.
What is the ZD-602 smoke absorber for?
The desktop smoke absorber is used for local air purification in the immediate vicinity of the working area. It is especially relevant where work is regularly performed that generates smoke, dust or unpleasant odors.
ZD 602 can be used for:
- soldering electronic components;
- repair and maintenance of electronics;
- work with printed circuit boards;
- assembly and disassembly of radio components;
- soldering wires and cables;
- work with flux and solder;
- small repair and assembly work;
- maintenance of electronic equipment;
- home amateur radio workshops;
- service centers and repair shops;
- training laboratories and soldering workplaces.
Device especially convenient for soldering tables, where it is important to organize local smoke removal without installing a large stationary exhaust system.
Adjustable suction power
The ZD602 is equipped with a powerful motor with the ability to adjust the suction power. This allows you to adjust the operation of the device according to the current task.
For simple work, you can use moderate suction intensity, and during active soldering or working with a larger amount of flux - increase the air flow.
Adjustment also allows you to find the optimal balance between cleaning efficiency and comfort during prolonged work.
Multi-layer filtration system
One of the main features of the ZD602 is a multi-layer air purification system. It is designed to trap various types of contaminants that may occur during soldering and other technical work.
| Filter code | Filter type | Purpose |
|---|---|---|
| 79-7222 | Dust filter | Dust and particulate retention |
| 79-7223 | PM2.5 filter | Fine particulate filtration |
| 79-7224 | Odor filter | Reduction of unpleasant odors |
The multi-layer design allows you to consistently clean the air from various types of contaminants. To maintain efficiency, it is necessary to check the condition of the filters in a timely manner and replace them in case of contamination or exhaustion of the resource.
LED illumination of the working area
The built-in LED illumination helps to better see the working area. This is especially useful when working with small electronic components, contacts, printed circuit board tracks and other small parts.
The combination of the hood and illumination in one device allows you to rationally organize the workplace and reduce the amount of separate equipment on the table.
Digital Control Display
The front panel of the ZD602 features a digital display that displays operating information and provides convenient control of the device.
The front location of the controls allows you to quickly change settings without interrupting work or moving the fume hood around the table.
Compact desktop design
The ZD602 is designed specifically for desktop use. It can be installed next to soldering equipment without taking up a significant portion of the work space.
The device is compatible with desktops that support soldering stations with a base size of up to 4.8 × 6.8 inches (approx. 12.2 x 17.3 cm).
This design makes the ZD602 a convenient solution for both the professional workshop and the home workplace of the radio amateur.
How to use the ZD602 fume extractor?
- Install the device. Place the ZD-602 on a flat, stable surface near the work area.
- Connect the power. Connect the device to a 100-240 V, 50/60 Hz power outlet.
- Prepare the work area. Position the suction area so that fumes from soldering or other work can enter directly into the air intake.
- Switch on the device. Start the fume extractor before starting work.
- Adjust the suction power. Set the required intensity according to the amount of smoke and the nature of the work being performed.
- Use the LED backlight. If necessary turn on the lighting for better visibility of the work area.
- After finishing work, turn off the device and, if necessary, leave it on for a short time to clean the air in the immediate work area.
Recommendations for operation and maintenance
- Do not block the air intake and outlet openings.
- Place the device as close as possible to the smoke source for the most effective local removal of contaminated air.
- Regularly check the condition of the filters.
- Replace contaminated filters with suitable replacement elements in a timely manner.
- Do not use the device in an environment with a large amount of liquid or where water can get on the housing.
- Do not use the smoke absorber as a substitute for full ventilation of the room.
- When working with substances that emit a significant amount of toxic or hazardous fumes, appropriate professional ventilation systems and protective equipment must be used.
Technical specifications ZD 602
| Model | ZD602 |
| Type | Desktop smoke absorber |
| Purpose | Local filtration of smoke, dust, odors and fine particles |
| Suction control | Yes |
| Filter System | Multi-layer |
| Filtration | Dust, PM2.5, Odors |
| LED-lighting | Yes |
| Display | Digital LED-display |
| Power | 25 W |
| Power Supply Voltage | 100-240 V |
| Frequency | 50/60 Hz |
| Maximum size of the base of the device | 4.8 × 6.8 inches (approximately 12.2 × 17.3 cm) |
| Filter 1 | 79-7222 — dust |
| Filter 2 | 79-7223 — PM2.5 |
| Filter 3 | 79-7224 — odor filter |
Who is the ZD602 suitable for?
The ZD602 desktop fume extractor will be a practical addition to the workplace of an electronics repairman, radio amateur, installer or specialist who regularly works with soldering equipment.
Thanks to its compact format, adjustable suction, LED lighting and multi-layer filtration, the device allows you to organize a more comfortable workplace without installing a bulky stationary hood.
Why should you buy the ZD602 fume extractor in the WST store?
If you regularly solder or repair electronics, a local hood will help make your workplace more comfortable and organized. ZD602 combines a smoke removal and filtration system, suction power adjustment, digital display and LED backlight in one housing.
