Soldering iron tip Zhongdi, TIP B5-2

B5-2 tip — replaceable copper tip with nickel coating, designed for soldering irons with a power of mainly 80 W. The tip has the shape of a screwdriver, which provides a wide working surface and convenient heat transfer to the soldering point.

The copper base provides good thermal conductivity, and the nickel coating protects the working surface from oxidation and contributes to a longer use of the tip. The screwdriver shape is suitable for working with both individual contacts and areas where more heat needs to be transferred.

Main advantages of the Zhongdi B5-2 tip

• Copper base — provides effective heat transfer from the heating element to the soldering point.
• Nickel coating — protects the tip surface and increases oxidation resistance.
• Screwdriver shape — wide working surface is convenient for soldering contacts and parts that require more heat.
• Diameter about 8 mm — suitable for corresponding soldering irons and heating units.
• Length 90 mm — corresponds to the design of compatible soldering equipment.
• Type B5 — tip of a suitable design for soldering irons that use this type of tip.
• For 80 W soldering irons — mainly used in powerful soldering irons, where efficient heat transfer is required.

Design and material

The base of the tip is copper, which is characterized by high thermal conductivity. This allows for rapid heat transfer to the working surface and effective heating of the soldering area.

The outer surface has a nickel coating, which helps protect the copper base from oxidation and wear. The working part of the tip is designed for contact with the solder during soldering work.

Tip shape "Screwdriver"

B5-2 has the shape of a screwdriver tip. Unlike thin conical tips, this shape has a larger working contact area, thanks to which it can transfer a significant amount of heat to the part.

A tip of this type is convenient to use for:

• soldering massive contacts;
• wires and cables;
• terminals and contact pads;
• electrical connectors;
• large components;
• working with areas of the board that require a larger heat reserve.

For which soldering irons is the Zhongdi B5-2 suitable?

The Zhongdi B5-2 tip is mainly used in 80 W soldering irons, the design of which provides for the installation of a tip of this type and size.

Before replacing, it is recommended compare the dimensions of the old tip and the design of the heating unit. Particular attention should be paid to the diameter of the seat, length and shape of the tip.

How to replace the tip?

1. Unplug the soldering iron from the power supply and wait for it to cool completely.
2. Remove the old tip according to the design of the specific soldering iron.
3. Install the Zhongdi B5-2 into the seat without applying excessive force.
4. Make sure that the tip is installed correctly and securely fixed.
5. Turn on the soldering iron and wait for it to heat up.
6. Before starting work, apply a small amount of solder to the working surface of the tip to tin it.

Recommendations for use

For a long service life of the tip, it is advisable to maintain its working surface in a tinned state. It is not recommended to leave the heated tip completely without solder for a long time, as this may contribute to oxidation of the working surface.

For cleaning, use appropriate brass shavings or a damp sponge, if required by the operating conditions. Do not treat the nickel-plated surface with abrasive materials or attempt to mechanically remove the coating.

The soldering temperature should be selected according to the type of solder, flux and materials used during the work.

Technical characteristics

Applications

The Zhongdi B5-2 tip will come in handy in electronics and electrical repair shops, service centers, amateur radio workshops, as well as for home repair and DIY work.

Due to its screwdriver shape and relatively large working surface, it is especially useful when soldering parts that require more heat than small electronic components.

Who is the Zhongdi B5-2 tip suitable for?

This tip should be considered as a replacement tip for users who need a wide working surface and efficient heat transfer. It is especially suitable for powerful soldering irons, mainly of the 80 W class, compatible with the B5 size.

Before purchasing, be sure to check the compatibility in terms of size and design of the soldering iron seat.

Buy the Zhongdi B5-2 tip at WST

Zhongdi B5-2 — a copper tip with nickel plating and a screwdriver shape, designed mainly for powerful 80 W soldering irons. The diameter of about 8 mm and the length of 90 mm make it a practical option for the corresponding soldering equipment.

You can buy the Zhongdi B5-2 tip at the WST store. The current price and the possibility of ordering are indicated on the product page.

Please note! The product photo may differ slightly in terms of inscriptions and shades of color from the actual appearance. This does not affect the technical characteristics and functionality of the product.