Zhongdi ZD-553P Solder Extractor — a replaceable soldering tool designed for quick and convenient removal of excess solder during assembly and disassembly of electronic components. The model is suitable for use with soldering stations ZD-8915, ZD-8917 and other compatible models that use a similar connection.
The suction device allows you to effectively remove molten solder from contact pads and holes on printed circuit boards, simplifying the dismantling of components and preparing a place for reassembly.
🔥 Main features
- ✔ Designed to remove molten solder
- ✔ Compatible with soldering stations ZD-8915, ZD-8917 and similar models
- ✔ Operating voltage 24 V
- ✔ Power 80 W
- ✔ 6-pin 6PIN connection interface
- ✔ Convenient for dismantling electronic components
- ✔ Helps to quickly clean contact holes and pads from solder
- ✔ Suitable for repair and service work with electronics
🛠 What is it used for
ZD-553P is used to dismantle electronic components from printed circuit boards. The heating element melts the solder, after which it is removed using the built-in suction mechanism.
The tool is especially useful when repairing boards, replacing radio components, dismantling resistors, capacitors, connectors and other components with through-hole mounting.
⚡ 80 W power and 24 V power supply
The suction device operates on 24 V voltage and has a power of 80 W. These parameters are sufficient for effective heating of solder and comfortable work during electronics repair.
Connection to a compatible soldering station is carried out via a 6PIN connector, which provides power transfer and control in accordance with the design of the compatible equipment.
🔧 Compatibility
The Zhongdi ZD-553P solder extractor is designed to work with soldering stations:
- ✔ ZD-8915
- ✔ ZD-8917
- ✔ other compatible models with the appropriate 6PIN connection
Before ordering, it is recommended to check the compatibility of your soldering station by model, supply voltage and type connector.
🛡 Advantages of the ZD-553P solder extractor
- ✔ Makes it easier to dismantle electronic components
- ✔ Quickly removes molten solder
- ✔ 80W power for efficient heating
- ✔ Low voltage 24V power supply
- ✔ Standard 6PIN connection for compatible stations
- ✔ Suitable for PCB repair and maintenance
- ✔ Convenient interchangeable tool for soldering station
📋 Technical specifications
| Model | ZD-553P |
| Type | Solder Extractor |
| Operating Voltage | 24V |
| Power | 80W |
| Connection Interface | 6PIN |
| Purpose | Removing Molten Solder |
| Compatibility | ZD-8915, ZD-8917 and Compatible Models |
⚠ Important before connecting
- ⚠ Check the model of your soldering station before connecting.
- ⚠ Make sure that the station supports a 24 V suction unit.
- ⚠ Check the 6PIN connector for compliance.
- ⚠ Do not connect the tool to equipment with a different supply voltage.
- ⚠ During operation, the heating part is high temperature — do not touch it with your hands.
Order Zhongdi ZD-553P 24 V, 80 W, 6PIN solder suction unit in the WST store. This is a practical interchangeable tool for soldering stations that will help you quickly and accurately remove solder during electronics repair, component dismantling and PCB maintenance.
Please note! The product photo may differ in terms of inscriptions and color shades from the actual appearance. This does not affect the technical characteristics and functionality of the product.
