2in1 HX36 soldering station (soldering iron + hair dryer), 2 displays + stand — is a modern combined station for soldering and desoldering SMD components, which is actually an improved version of the popular 8898 model. It has retained everything that craftsmen loved about the classic 8898: compactness, fast heating, easy control and versatility, but has received more stable operation, more convenient settings and improved electronics.
The station is perfect for both home electronics repair and everyday work in the workshop. It doesn't take up much space on the table, quickly reaches the temperature and allows you to work comfortably with small SMD components, wires, connectors or power boards.
🔥 What makes the HX36 better than the usual 8898
- ✅ More stable temperature maintenance
- ✅ Faster entry into operating mode
- ✅ More convenient digital control
- ✅ Separate displays for the hair dryer and soldering iron
- ✅ Hair dryer cooling function after turning off
- ✅ Sleep mode (SLP) to extend the heater's life
- ✅ Compact case with built-in stand
In real work, this is one of those stations that is often bought "for the start" and then not changed for years. For repairing TVs, laptops, power supplies, LED backlights, car radios or Arduino projects - its capabilities are more than enough.
🛠 Soldering iron
The 60 W soldering iron is equipped with a ceramic heater that heats up quickly and maintains the temperature normally even under load. This is especially noticeable when working with massive contacts or polygons on the board.
- Power: 60 W
- Temperature range: 180-500°C
- Temperature maintenance accuracy: ±5°C
- Ceramic heater
- Button control
For most work, the comfortable temperature is - 300-350°C. If you constantly maintain 450-500°C, the tip starts to oxidize faster — this is normal for any stations of this class.
💨 Hot air gun for SMD mounting
The 600 W hair dryer is well suited for dismantling microcircuits, connectors, controllers, USB ports, heating boards and heat shrinking. The air flow is regulated separately, so you can work even with small components without the risk of “blowing” neighboring elements.
- Power: 600 W
- Temperature: 100-500°C
- Airflow control
- Automatic cooling after switching off
- SLP sleep function
After switching off, the hair dryer does not just turn off — the system automatically blows the heater until it cools down to approximately 80°C. This greatly extends the life of the spiral and protects the handle from overheating.
📖 Quick user guide
Turning on the soldering iron
- Turn the soldering iron switch to the «I» position
- The set temperature will appear on the display
- Use the ▲/▼ buttons to set the desired value
Turning on the hair dryer
- Turn on the SMD hair dryer switch
- Set the temperature with the ▲/▼ buttons
- You can adjust the air flow speed with the SET button
Sleep mode (SLP)
When the hair dryer is installed in the holder, the station automatically goes into sleep mode cooling and sleep. The display flashes «SLP». After cooling, the fan stops.
Temperature calibration
To enter the calibration mode, you need to hold down the adjustment buttons while turning on the station. Correction is available within ±99°C.
Error indication
- H-E — heater problem
- S-E — temperature sensor malfunction
📋 HX36 Specifications
| Type | 2in1 Soldering Station |
| Model | HX36 (improved 8898) |
| Hair dryer power | 600 W |
| Soldering iron power | 60 W |
| Soldering iron temperature | 180–500°C |
| Hair dryer temperature | 100–500°C |
| Soldering iron heater type | Ceramic |
| Air control | Yes |
| Displays | 2 digital LEDs |
| Power supply | 220V AC |
| Sleep function | Yes |
| Hair dryer cooling | Automatic |
HX36 — is one of the most successful compact stations in its class. It is easy to learn, not overloaded with unnecessary functions and really convenient in everyday work. A good option for both a home workshop and for electronics repair service.
