Suoer SON-1210D+ battery charger — a reliable solution for charging 12V batteries of various types. The device supports lead-acid, AGM, GEL and modern LiFePO4 batteries, providing fast, safe and automatic charging. Ideal for cars, motorcycles, solar systems and other devices.
🔋 Supported battery types
- ✔ Lead-acid (WET, FLOODED)
- ✔ AGM (Absorbent Glass Mat)
- ✔ GEL (gel)
- ✔ LiFePO4 (lithium-iron-phosphate 12V)
Thanks to intelligent control and a multi-stage charging algorithm, the device works correctly with batteries of different chemistries, automatically adapting current and voltage for a safe charging process.
⚙ How it works
The charger uses a three-phase charging algorithm, optimized for both lead-acid and lithium-iron-phosphate batteries:
- 🔋 Constant Current (CC) Phase — fast and controlled energy filling at low battery voltage
- ⚡ Constant Voltage (CV) Phase — voltage stabilization and smooth current reduction
- 🟢 Floating / Support Mode — minimum current to maintain a full charge without the risk of overcharging
For LiFePO4 batteries, the float charge mode does not cause cell degradation, and the Mini MCU controller prevents overvoltage and exceeding the permissible current.
🛡 Safe LiFePO4 charging
➤ ✔ Correct charging voltage for 12V LiFePO4
➤ ✔ Automatic current limitation
➤ ✔ Protection against overcharging and short circuit
➤ ✔ Compatibility with batteries with built-in BMS
Advantages of the SON-1210D+ charger
➤ ✔ Support for various battery types: lead-acid, AGM, GEL, LiFePO4.
➤ ✔ Three-phase charging mode: constant current (CC), constant voltage (CV), floating mode.
➤ ✔ Intelligent control Mini MCU provides automatic shutdown after full charge.
➤ ✔ Complete protection: against overcharging, short circuit and reverse polarity.
➤ ✔ Convenient indication: two LED displays show charging and power-on status.
➤ ✔ Built-in cooler provides cooling at current up to 10A.
➤ ✔ Compact and lightweight: easy to place on the workplace or carry.
Suoer SON-1210D+ Features
| Battery type | Lead-acid, AGM, GEL, LiFePO4 |
| Voltage | 12 V |
| Maximum current | 10 A |
| Input voltage | 220 V AC |
| Output voltage | 12 V DC |
| Protection | Overcharge, short circuit, reverse polarity |
| Indicators | 2 LED displays (power on, charge) |
| Charging modes | Constant current, constant voltage, floating mode |
| Dimensions | 152 × 75 × 60 mm |
| Weight | 0.9 kg |
Order Suoer SON-1210D+ in the WST store today and provide your batteries with reliable, safe and efficient charging. The ideal choice for cars, motorcycles and modern LiFePO4 batteries!
