USB Boost Converter with Switch (5V to 9V/12V): Convenience and Versatility in One!
Need power for your higher voltage equipment? The USB Boost Converter from WST is your perfect choice!
The KWS-912 USB Boost Converter is a convenient and reliable device that allows you to increase the output voltage from a USB port from 5V to 9V or 12V. It is an ideal solution for powering a variety of devices that require a higher voltage than a standard USB port can provide.
Features and Benefits:
- Versatility: Forget about the excessive number of power supplies! This converter easily powers a variety of devices, from measuring instruments to audio equipment.
- Convenient Switch: Easily select the desired voltage - 9V or 12V, ensuring maximum compatibility with your equipment.
- Compact and Practical: Thanks to the stylish compact design and 80 cm long cable, this device is convenient to use in any conditions.
- Reliable Operation: High performance and stable operation guarantee efficient power supply to your equipment without failures.
- Built-in Voltmeter and LED Indicator: Monitor the voltage in real time, and the LED indicator reports on the operation of the device.
- Router Power: Use it to power your router from a power bank, ensuring stable and reliable internet in any in place.
USB 5V to 9V and 12V Router Cable:
This device works as a step-up converter and is ideal for powering routers. Boosts voltage from 5V to 9V or 12V, allowing you to use your router even when only a power bank is available.
KWS-912 converter specifications:
- Type: Boost voltage converter
- Input voltage: USB 5V
- Output voltage: 9V or 12V (selection by switch)
- Maximum current (output): 1000 mA (for 9V), 800 mA (for 12V)
- Connection connector: 2.1 x 5.5 mm (inner diameter x outer diameter)
- Power cable length: approx. 80 cm
- Material: Plastic
- Color: Black
Package:
- USB Boost Converter 9/12V, input 5V, output 9/12V 1A - 1 pc.
- Adapter (from 5.5 x 2.1 to 3.5 x 1.35) - 1 pc.
Ensure yourself with convenience and efficiency with the USB Boost Converter from WST. Order now and enjoy all its benefits!
Order the USB Boost Converter KWS-912 in the WST store at a bargain price. This compact and reliable device will become your indispensable assistant in connecting and powering various electronic devices, ensuring stability and efficiency of operation.
Instructions for connection and use:
1. Prepare the module
- Check the module for damage (cracks, broken connectors, etc.).
- Make sure that the device you want to power matches the output characteristics of the module (voltage and current).
2. Select the output voltage
- There is a switch on the case to select the output voltage:
- Position "9V" — for 9V.
- Position "12V" — for 12V.
- Set the switch to the desired position before connecting to your device.
3. Connect the power source
- Insert the USB plug of the module into a power port (e.g. computer, power bank or charger).
- Make sure the power source can provide sufficient current (minimum 2A input for stable operation).
4. Connect your device
- Connect the device you want to power to the output connector (DC connector).
- Before connecting, it is advisable to check the output voltage with a multimeter to make sure that it matches the selected voltage.
5. Turn on the system
- After checking the connections, turn on the power. The device should start working.
Safety Notes:
- Overload:
- Do not exceed the maximum load current (1A for 9V, 0.8A for 12V).
- If the module is overloaded, it may overheat or shut down.
- Short Circuit: Avoid shorting the output connector contacts.
- Power Supply Quality: Use high-quality USB adapters or power banks with an output current of at least 2 A for stable operation.
- Temperature: If the module becomes very hot, stop using it and check the current consumption of the device.
Typical usage scenarios for KWS912:
- Powering routers.
- Working with Arduino, Raspberry Pi, or other electronic circuits.
- Portable audio amplifiers.
- Security cameras.
